Products
“SEMUDA”- Alarm Annunciator System
Application
‘SEMALARM 6002’ Alarm Annunciator is meant to provide a centralize indication of all trip and non-trip alarm in control and relay panel by sensing actuation of any field contact. The unit is compact in size and suitable for flush mounting on panel. Application Area – Steel Plants, Chemical Plants, Thermal, Hydal, Nuclear, Power Generation Stations, Sub-Stations, Boiler and Furnace Control, Material and Coal Handling Plants, Booster Pumping Stations, etc.
Technical Specifications
| Description | Details | Description | Details |
|---|---|---|---|
| Make | SEMUDA | Model No. | SEMALARM 6002 |
| No. Of Window | MODEL 6002 – 4,6,8,10,12,16,20 & 24,30,32,36,40 & 48 Window Multiples of Window on request Model 6002 only. |
Display Window Size | MODEL 6002 : 65 X 30 m.m. Or 30 X 30 mm. |
| Type of Software | Micro controller based. | Scane Time | 1 Micro sec. Approx. |
| Power supply | SMPS | Rated Supply Voltage | 90 – 270V AC or DC Universal 22 – 32 V DC |
| Power Consumption | 1.2 Watt < 6 VA / 2 Watt < 3 VA | Rated Frequency | 50 / 60 Hz +/- 5% |
| Interrogating Voltage | + 12V DC. | Power Pack protection | Over Load & Short Ckt. Protected |
| Permissible Contact Resistance |
Less than or equal to 1.2 KΩ | Contact Through Initiating |
6 Milli Amp. |
| Display L.E.D. Rating |
10 Milli Amp. | Flashing Rate |
60 / 30 per minute |
| Insulation Resistance |
Infinity | Nature of Alarm |
Potential Free |
| Fault Input |
N / O or N / C Selectable for each window | No. of L.E.Ds / Window |
4 Nos. Superbright L.E.D. |
| L.E.D. Protection |
Through Resistance | Response time of Flasher |
20 m.s. |
| Alarm Sequence |
ISA 18.5 – Standard Sequence : Manual Reset, Auto Reset, First Out & Ring Back. |
Enclosure Class |
Industrial. |
| Relative Humidity |
95% RH. | Operating Temperature |
55 Dg.C. Maximm. |
| Inscription |
On Tracing Paper or Photo Negatives. | Material of PCB |
Glassepoxy |
| Push Button details / Quantity |
N / O Contact. / 4 Nos. | Colour of Window |
Red ( Green & Yellow on request ) |
| Audio Contact Rating |
Potential Free N / O Contact, Contact Rating 5Amp. @ 250V AC. / 28V DC resistive. |
Cascading Facility |
Provided |
| Price |
Rs. 650/- Per window |
Technical Specifications
| Description | Details |
|---|---|
| Make | SEMUDA |
| Model No. | SEMALARM 6002 |
| No. Of Window | MODEL 6002 – 4,6,8,10,12,16,20 & 24,30,32,36,40 & 48 Window Multiples of Window on request Model 6002 only. |
| Display Window Size | MODEL 6002 : 65 X 30 m.m. Or 30 X 30 mm. |
| Type of Software | Micro controller based. |
| Scane Time | 1 Micro sec. Approx. |
| Power supply | SMPS |
| Rated Supply Voltage | 90 – 270V AC or DC Universal 22 – 32 V DC |
| Power Consumption | 1.2 Watt < 6 VA / 2 Watt < 3 VA |
| Rated Frequency | 50 / 60 Hz +/- 5% |
| Interrogating Voltage | + 12V DC. |
| Power Pack protection | Over Load & Short Ckt. Protected |
| Permissible Contact Resistance |
Less than or equal to 1.2 KΩ |
| Contact Through Initiating |
6 Milli Amp. |
| Display L.E.D. Rating |
10 Milli Amp. |
| Flashing Rate |
60 / 30 per minute |
| Insulation Resistance |
Infinity |
| Nature of Alarm |
Potential Free |
| Fault Input |
N / O or N / C Selectable for each window |
| No. of L.E.Ds / Window |
4 Nos. Superbright L.E.D. |
| L.E.D. Protection |
Through Resistance |
| Response time of Flasher |
20 m.s. |
| Alarm Sequence |
ISA 18.5 – Standard Sequence : Manual Reset, Auto Reset, First Out & Ring Back. |
| Enclosure Class |
Industrial. |
| RelativeHumidity |
95% RH. |
| Operating Temperature |
55 Dg.C. Maximum. |
| Inscription |
On Tracing Paper or Photo Negatives. |
| Material of PCB |
Glassepoxy |
| Push Button details / Quantity |
N / O Contact. / 4 Nos. |
| Colour of Window |
Red ( Green & Yellow on request ) |
| Audio Contact Rating |
Potential Free N / O Contact, Contact Rating 5Amp. @ 250V AC. / 28V DC resistive. |
| Cascading Facility |
Provided |
| Price |
Rs. 650/- Per window |
“SEMUDA”- Earth Leakage Relay
Application
- Enclosure leakage for switch board and control panels.
- Earth leakage protection for all Electrical equipments.
- Protection for hazardous enviorment like Oil Refinery / Chemical Industries / Coal Minies and other Electrical distributions.
- Special protection for Mining and controlgears.
Technical Specifications
| Description | Details | Description | Details |
|---|---|---|---|
| Current seting range | Range : 50 mA, 100 mA, 200 mA, 300 mA, 500 mA, 750 mA, 1A,1.5A & 2A | Time delay setting | Range : 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 & 1 sec.. |
| Output contact | 2 C/O AC 5 Amps | Power Consumption | < 3VA Max. |
| Reset | Manual reset | Current sensing | CBCT ( Supplied with each unit ) |
| System Test | Test Push Button Terminal ( refer diagram ) – For Type No. SEL06 | Temperature range | 5 – 55 degree ambient |
| Humidity | Up to 95% R.H. | Enclosure | Sheet Steel |
| Dimensions | 115 mm. X 90 mm. X 70 mm. | Terminal | 6 & 8 Screw Terminal ( refer diagram ) |
| Weight |
400 gm. aprox. excl. CBCT | Auxiliary input voltage (please specify the required voltage) |
12V / 110 / 230 Volt AC + 15% – 20% with 50 Hz +/- 3 Hz |
| Price |
Relay :- Rs. 1200/- CBCT :- Rs. 500/- |
Technical Specifications
| Description | Details |
|---|---|
| Current seting range | Range : 50 mA, 100 mA, 200 mA, 300 mA, 500 mA, 750 mA, 1A,1.5A & 2A |
| Time delay setting | Range : 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 & 1 sec.. |
| Output contact | 2 C/O AC 5 Amps |
| Power Consumption | < 3VA Max. |
| Reset | Manual reset |
| Current sensing | CBCT ( Supplied with each unit ) |
| System Test | Test Push Button Terminal ( refer diagram ) – For Type No. SEL06 |
| Temperature range | 5 – 55 degree ambient |
| Humidity | Up to 95% R.H. |
| Enclosure | Sheet Steel |
| Dimensions | 115 mm. X 90 mm. X 70 mm. |
| Terminal | 6 & 8 Screw Terminal ( refer diagram ) |
| Weight |
400 gm. aprox. excl. CBCT |
| Auxiliary input voltage (please specify the required voltage) |
12V / 110 / 230 Volt AC + 15% – 20% with 50 Hz +/- 3 Hz |
| Price |
Relay :- Rs. 1200/- CBCT :- Rs. 500/- |
“SEMUDA”- Jute Moisture Meter
Application
The Meter is directly calibrated for moisture regain % in Jute Fabrics and
consists of a fully Transistorised circuit. The meter is powered from four flash light cells. The working principle is to measure the electrical conductivity of jute materials, which changes with moisture content. The instrument can also be calibrated directly for jute seeds. The meter is light, handy and easy to operate. The calibrations are not materially affected by the variations in temperature, humidity and battery voltage.
consists of a fully Transistorised circuit. The meter is powered from four flash light cells. The working principle is to measure the electrical conductivity of jute materials, which changes with moisture content. The instrument can also be calibrated directly for jute seeds. The meter is light, handy and easy to operate. The calibrations are not materially affected by the variations in temperature, humidity and battery voltage.
Jute Moisture Meter As per – IS 8824 : 1988 Part II
Technical Specifications
| Description | Details | Description | Details |
|---|---|---|---|
| Measuring Regain of Jute Fabric |
a) MODEL II Single Scale – 9% to 40% b) MODEL III Double Scale – 8% to 70% |
Electrode 3 Type | a) Plane Head b) Spaik Head (4 Nos. 1⁄2” Iron Pin) c) Head (2 Nos. Iron Rod 8 inch or 10” inch) |
| Battrey 2 Type | a) For Model II 2 Nos. ( Battery No. – 1015 MJ/AAR6P(1.5V)) b) For Model III 4 Nos. ( Battery No. – 1050 R20P(1.5V)) |
Price | a) MODEL II Single Scale Rs. 8950/- b) MODEL III Double Scale Rs. 9950/- |
Jute Moisture Meter As per – IS 8824 : 1988 Part II
Technical Specifications
| Description | Details |
|---|---|
| Measuring Regain of Jute Fabric |
a) MODEL II Single Scale – 9% to 40% b) MODEL III Double Scale – 8% to 70% |
| Electrode 3 Type | a) Plane Head b) Spaik Head (4 Nos. 1⁄2” Iron Pin) c) Head (2 Nos. Iron Rod 8 inch or 10” inch) |
| Battrey 2 Type | a) For Model II 2 Nos. ( Battery No. – 1015 MJ/AAR6P(1.5V)) b) For Model III 4 Nos. ( Battery No. – 1050 R20P(1.5V)) |
| Price | a) MODEL II Single Scale Rs. 8950/- b) MODEL III Double Scale Rs. 9950/- |
“Semuda” – Under Voltage Relay
Technical Specifications
| Description | Details | Description | Details |
|---|---|---|---|
| Usage/Application | Control Panel | Voltage | 110 V |
| Type | Undervoltage relay | Current | AC |
| Number Of Poles | 2 Pole | Weight | 150 kg (approx) |
| Country of Origin | Made in India | Power Source | Electric |
| Frequency | 50/60 Hz | Material | Stainless Steel |
| Manufactured By | Semuda Corporation | Price | Rs. 800/- |
Technical Specifications
| Description | Details |
|---|---|
| Usage/Application | Control Panel |
| Voltage | 110 V |
| Type | Undervoltage relay |
| Current | AC |
| Number Of Poles | 2 Pole |
| Weight | 150 kg (approx) |
| Country of Origin | Made in India |
| Power Source | Electric |
| Frequency | 50/60 Hz |
| Material | Stainless Steel |
| Manufactured By | Semuda Corporation |
| Price | Rs. 800/- |